 |
| |
|
|
 |
 |
 |
 |
|
|
TO OFFER OUR MOST SUITABLE EQUIPMENT/SYSTEM FOR YOU |
|
|
|
In case you find our equipments suitable, kindly get in touch with us with the details regarding: |
| |
-
Your products to be painted/coated, its dimensions and quantity of production per day
-
Your paint/spray material consumption per day/month.
-
Details of paints/materials used by you.
-Materials family/type-urethane, epoxy, acrylic, silicon etc.
-Viscosity in centipoises.
-Materials behavior against temperature,shear rate and time.
-Fillers and abrasiveness
-Compressibility of materials.
-
Working conditions
- Ambient and application temperatures.
- Material flow rates.
- Application pressures.
- Dispense cycle rates and sequence.
-
Application Methods
- Extrusion or spray.
- Manual or automatic.
-
Your present setup for application if there.
-
Your expectations and modernization plans etc.
-
If two component materials besides all above:
- Mixing ratio by volume
- Set time after mixing
- Preheat requirements
- Viscosity after mixing
|
|
And in case you find our Paint Circulation System suitable for you, we need to know the following. Kindly furnish the details at the earliest and oblige. |
| |
-
Layout of the paint shop and proposed location of Paint Kitchen.
-
Dimension of proposed paint kitchen, inform floor area and height available.
-
Number of colour shades (solids and metallic), primers, primer surfaces, clear coat if any to be sprayed per day.
-
Consumption pattern of the various top coats, primers and clear coat. Inform consumption per day.
-
Total number of shades you propose to use as standard, dedicated or neutral colours.
-
Number of drop points at the top coat booths, at the primer booths or various spray booths available with you. Inform number of shades you wish to have an access to in different spray booths.
-
Inform about the location of drop points, quantity and also if you wish to have drop point at both side of the booth.
-
Do you need heating or cooling of paint for maintaining desired temperature.
-
Specify the material of construction you wish to have for the tanks and piping.
-
Inform if you can provide compressed Air line in the paint shop, ventilation and safety equipments.
-
Your expectations and modernisation plans etc.
|
|
On receipt of the above information, we shall write to you with our offer. |
| |
|
| |
|
|
 |
|
 |
|
| |
|
|
|
