| EXTERNAL PAINTING OF 200 LTRS BARREL |
|
|
Following are the main features of this system:
-
Painting is done by 13 numbers of Spray Guns which includes individual Spray Guns for the bung and two Spray Guns with Cut Nozzle for fine band.
-
13 Nozzles gives fast application, almost 300 barrels/hr without overspray .
-
In-built Paint Heaters at lower pressures enables the paint to form a spray. Drop in viscosity reduces overspray, saves paint, results uniform coating and fast drying.
-
High volume output Pump offers Pulsation free uniform volume.
-
PLC control panel gives full proof performance with High flexibility for adjusting various paints. |
|
|
|
For Barrel Painting with three colors i.e. top & bottom band, central band and top & bottom cover, the Automatic Painting process for 200 ltr. Barrel is as per below:
-
The Barrel enters the Spray Booth and starts rotating on the Spinner.
-
The Control Panel is triggered no sooner the Barrel enters the Spray Booth.
-
Independent Painting for three colors starts at intervals covering the entire container. After completion of painting , the barrel is ejected out towards the flash off zone on the conveyor when all the Spray Guns are OFF . | |
| ............................................................................................................................................................. |
| INTERNAL PAINTING FOR 200-LTRS. BARREL |
|
|
|
|
|
Note:
Customized barrel paint systems for other sizes and specifications available on requirement. |
| | |
| ............................................................................................................................................................. |
